TRISEG Segments for iDISC and Turbo Disc
With the complete range of iTOOLS segments you are finally able to negotiate all the sanding tasks you will face!
Years of hands-on experience has enabled us to develop a conclusive range of top quality segments which enables you to sand and grind all surfaces and materials you will meet on the job.
All our segments have been designed to perform to their best on small single disc machines.
We have developed the base plates and the segment blocks uniquely for single disc machines in order to
• cover a larger area than generic segments
• remove as much dust from the sanding
action as possible
• minimize scratches
Diamonds versus other sanding options
Diamond segments are incredibly aggressive because the diamonds keep the same grit and sharpness for their entire lifetime.
Unlike tungsten carbide, carborundum and sand paper, where the sanding effect rapidly deteriorates because of the rounding of the grains.
See the table below for our range of TRISEG Segments or download iDISC Segment Selector or the Turbo Disc Segment Selector both in pdf format.
Article Number | Variant | Colour |
105530 | TRISEG G20 (Red) Grit 20 Medium Floor All-round segment for medium hard and hard floors. (4 pcs.) |
Red |
105660 | TRISEG G20 SF (Grey) Grit 20 Soft Floor All-round segment for soft and uneven floors. (4 pcs.) |
Grey |
105540 | TRISEG G70 (Orange) Grit 70 Medium Floor Optimized for fast sanding of freshly laid screed. (4 pcs.) |
Orange |
105670 | TRISEG G70 SF (Yellow) Grit 70 Soft Floor Optimized for fine sanding of soft concrete. (4 stk.) |
Yellow |
105550 | TRISEG G120 (Purple) Grit 120 Optimized for extra fine sanding. (4 pcs.) |
Purple |
105680 | TRISEG PCD Split (Black) PCD Split Flakes of PCD (polycrystalline diamond) removes paint, action back, etc. (4 pcs.) |
Black |
106050 |
TRISEG PCDxtreme (Green) NB! ONLY FOR iDISC |
Green |