Pore and Crack Filler - lithium-based
For a small amount of money you can now give your floor extra strength, remove pin-holes and shrinkage cracks, and obtain an attractive homogeneous surface!
The experience gained from hundreds of thousands of treated square meters is behind the development of this water-based combination product, which consists of a specially developed nano-lithium hardener to which modified polyurethane has been added as a filler. Pore and Crack Filler is a cheap alternative to other common methods: Save up to 50 % per m2!
This is what you do — in brief
To put it in popular language, you ”spatulate” an unbelievably attractive surface with the help of the polishing machine.
Pore and Crack Filler is sprayed or rolled onto a floor polished with grain 60/80 or with SHARK grain 100, and you abrade and distribute the fine sludge consisting of Pore and Crack Filler and the abraded material.
When the floor is dry, the sludge layer is polished off, and you now have an attractive, even, and strong surface! You can choose to let the floor remain untreated if no protective aftertreatment is necessary.
Use special pads, but depending upon the floor you can use both a satellite grinder and a rotary sander/single disc machine.
This is why it works
Lithium silicate has some physical and chemical properties that make it ideal for hardening the surface of cement-based floors:
• The lithium silicate is smaller than other silicates and therefore penetrates deeper down into the floor.
• Lithium reacts with the calcium hydroxide of the cement by forming strong tricalcium silicate structures that strengthen the surface and make it more durable.
Specifications
Solids ……………..… Approx. 36%
Density (at 20°) …..… Approx. 1.37 gr/cm3
pH value …………….. Approx. 11.3
Viscosity (at 20°)…….. Approx. 100 mPas
Dilutability ………….. With water
Colour …..……………. Clear
Article Number 401190
Choose language
